At our SHOP we sell ASEC MORTICE LOCKS at the best prices where we possibly can. Besides this brand of lock we have a large selection of other locks, inclusive of Yale, Union, Chubb, Multilock, Ingersoll and ERA, just to name a few.
Our Locksmiths and Carpenters will also supply and fit them for you.
Telephone:- 020 8800 6041.
To speak to a member of our team.
Our Shop has been based at:-
79 Grand Parade
Green Lanes
London N4 1DX
For more than 35 years.


Telephone Night or Day on the following number....THIS IS A FREEPHONE NUMBER....Even from a mobile.

Call us 24 hours a day at 0800 136 481

Why pay sky high prices for mortice locks, when you can purchase ASEC MORTICE LOCKS Sash Locks and Deadlocks, through our North London Locksmiths Ltd. SHOP at reasonable prices. ASEC LOCKS cannot be purchased through the sheds, only through bona fide Locksmiths, such as our Company.

These locks are as good as any lock that cost double the price.



The Number "ONE" ASEC MORTICE LOCKS stockist, for fittings and sales.


The Asec Mortice Locks British Standard ASEC Deadlock MORTICE LOCK conforms to all Insurance requirements.

It is a steel cased 5 lever dead lock with integral anti drill plates on both sides of lock, it comes with 2 steel keys, extra keys can be ordered with lock

This lock is suitable for wooden external doors; it has a 20mm deadbolt with 2 hardened steel inserts and complies with BS3621:2007.

It has at least 1000 differs. It is Insurance and police approved. It comes with all fixing screws, boxed strike and escutcheons.

Comes in brass or satin finishes with 2 sizes 64mm (2 ½”) and 76mm (3”)


The Asec Mortice Locks Non  British Standard ASEC Deadlock MORTICE LOCK is a standard deadlock

It has a brass deadbolt with 2 hardened steel inserts and is suitable for internal residential and office doors, it is an ideal lock for replacing standard 3 lever deadlocks. 

It comes with a box strike plate and all fixing screws, plus fitting instructions.

 Comes in 2 sizes 2 ½” (64mm) and 3” (76mm). The finishes are Satin and Brass.


The locks come in brass or satin and in 2 1/2" or 3".

These Asec Mortice Locks Sash Locks are steeled case with integral anti-drill plate on cap & case, it is suitable for use on external doors as well as internal flat doors.

It has a brass deadbolt with 2 hardened steel inserts, to help prevent cutting.

It comes with 2 plated steel key, but, extra keys can be cut when ordering the lock, the lock has a minimum of 1000 differs.

It is BS3621:2004 compliant and is Insurance approved and police approved


The Asec Mortice Locks Standard Sash Locks, are minus are minus the anti drill therefore making them an easy replacement, without to much work, for most makes of sash locks. 

They come with a brass deadbolt with hardened steel pin inserts and with an easy to change reversible latch bolt, the strike plate comes boxed in.

These Asec sash locks are ideal for internal residential or office doors.

They have 5 closed gated levers, with anti pick device and come with approximately 500 differs,

All fitting instructions and screws are supplied and come with 2 keys, but, extra keys can be ordered with the lock.


The Asec Mortice Locks Euro Profile Cylinder Case is ideal for medium security doors, such as office doors and an added lock to your flat door.  It is ideal for communal doors, where a Euro profile turn knob cylinder can be used, to open locks from the inside, without a key, it can also be used key and key, it takes all sizes of euro profile cylinders and can be fitted to right and  left hand opening doors.

It comes in brass or satin and comes in a 2 1/2" and 3" backset .

Can be keyed alike with the lock below.


The Asec Mortice Locks Euro Profile Cylinder Sash case is ideal for medium security doors, such as office doors and doors where a latch system is needed  to keep door closed, a key and key system or a Euro profile turn knob cylinder can be used, to open locks from the inside, without a key, it takes all sizes of euro profile cylinders and can be fitted to right and  left hand opening doors.

It comes in brass or satin and comes in a 2 1/2" and 3" back set .

Can be keyed alike with the lock above.


If you cannot find the ASEC LOCKS or any other locks, you are looking for, on our WEB SHOP or would like an estimate for fitting of locks, please fill in the form below, giving full details of lock required, and we will respond with Lock Sales price as soon as possible.

Alternatively you can visit our Locksmith Shop or telephone our office on 0208 800 6041 to speak to a member of our Locksmith Team, who will be happy to give advice on Locks and Keys.


Please supply me with a free estimate for work required.

Please note that all fields followed by an asterisk must be filled in.

Please enter the word that you see below.