Chubb locks sold at discounted prices through our website shop.

All the following Chubb locks or any other locks shown, are sold through our website shop at discounted prices, if you cannot find a lock you need let us know through this link to our website shop sales, whether it be Chubb locks or any other type of locks and we will cost them for you, inclusive of postage

Chubb 3G114 5 Lever Mortice Deadlock BS3621

The Chubb 5 Lever 3G114 Deadlock is locked or unlocked by key from either side. Chubb 3g114 deadlock Can be supplied with microswitches for use with alarm systems. This deadlock comes Supplied with matching escutcheons. This lock has a 5 lever mechanism. Can be keyed alike, supplied with atotal of 2 keys. Case comes in a silver finish and forend comes in either brass or satin chrome finish. Can be keyed alike if required.

Cost including VAT postage and packing £38.00

Extra keys cut to order at £2.50 each...on ordering only.
Want to know more about this lock


Chubb 3G110 5 Detainer Deadlock PB. Mechanism: 5 Detainer. Case Finish: Silver. Face Finish: Brass Face. Keys Supplied: 2. Case Depth: 73mm. Backset: 44mm. Case Height: 122mm. Foreend Length: 178mm. Fireend Width: 25mm. Supplied c/w matching escutcheons. Operation: Deadbolt is locked or unlocked by key from either side. This lock can be mastered or keyed alike.

Cost including VAT postage and packing £75.00

Extra keys cut to order at £3.00 each...on ordering only.
Do you want to know more about this lock?


5-lever sashlock from CHUBB to BS 3621:2004 insurance approved. Deadbolt is locked or unlocked from either side. Reversible roller latchbolt withdrawn by lever handle from either side.Case sizes 67mm and 80mm. 1,000 key differs. Follower 8mm. Brass or satin chrome forend.Supplied with 2 keys.

Cost including VAT postage and packing £49.00

Extra keys cut to order at £3.00 each...on ordering only.
Do you want to know more about this lock?


The Chubb 3R35 Mortice 5 detainer Dead Locking Door Latch has been used in a lot of locations where there is high traffic and a good level of security is required. Using the key on the outside allows the opening of the lock, from the inside you would use a handle, there is special furniture available for this. On the inside handle at the top is a snip that allows you to hold back the latch if so required. Just above the main latch there is a dead locking snip that when the door is closed the snip gets depressed into the body of the lock and dead locks the main latch. These locks can be mastered, also be mastered to the 3K70 3G110 locks. These Chubb locks an also be keyed alike with other Chubb locks.

Cost including VAT postage and packing £112.00

Extra keys cut to order at £3.50 each...on ordering only. Do you want to know more about this lock?


Heavy duty euro profile cylinder lockcase • For timber door hinged on the left or the right • Not suitable for use on doors less than 40mm thick Operation: • Deadbolt is locked or unlocked by euro profile cylinder from either side • Extended 20mm deadbolt for secure positive deadlocking and resistance against attack Specification: Reference 3C14 Case Size 67mm Backset 40mm Case Bronze powder coat Forend Stainless steel or brass Box Strike Assembly Painted to match forend Deadbolt Brass, with hardened Can be used with any high security cylinder, can be mastered or passed. steel rollers Rebate Kit na Security Escutcheon To Suit B-3C14E (38mm) (sold separately) B-53053 (26mm) Features: • Force resistant, anti drill and anti-saw security features • Available with square forend and striking plate • 20mm bolt throw • Double bolt through fixings for escutcheons at either 38mm centres or 26mm centres

Cost including VAT postage and packing £99.50
Do you want to know more about this lock?


• Heavy duty Chubb locks include a euro profile cylinder lockcase • For timber door hinged on the left or the right • Not suitable for use on doors less than 40mm thick

Operation: • Deadbolt is locked or unlocked by euro profile cylinder from either side • Two independently operated levers within the case to control deadlocking of the bolt and will frustrate manipulation of the mechanism to bypass the cylinder Specification: Reference 3C10 Case Size 73mm Backset 44mm Case Silver powder coat Forend Stainless steel or brass Box Strike Assembly Painted to match forend Deadbolt Brass, with hardened steel rollers Rebate Kit Can be used with any high security cylinder, can be mastered and passed.

Cost including VAT postage and packing £66.00
Want to know more about this lock?


Go to our web site shop orders for any Chubb locks required.